Inexpensive DIY Batten Wall Using Lattice Strips


Tutorial: How to use lattice strips as an straightforward, inexpensive substitute to set up a Diy batten wall for incorporating vintage character to basic walls.

Lattice strips are the MVP of this Diy batten wall project!

I suggest they truly are the unsung hero of a whole lot of very little DIYs and crafts all-around right here. (Recall that shower curtain art we framed with lattice strips a when back again?) This time it wanted a spotlight in the breakfast nook.

A DIY batten wall behind brass vintage sconces above a green banquette bench

Given that we sort of have an dependancy to intricate wall molding all around below, it is unquestionably no shock at all that immediately after we completed putting in and portray our Fb Marketplace banquette come across in the breakfast nook, Robert and I appeared at each and every other and mentioned, “Something’s missing.”

Those smooth partitions desired character! And lattice could do the task inexpensively. Mainly because molding is 1 of my favored methods to make a home appear deluxe.

A breakfast nook with olive green banquette, herringbone floors, white walls, and black bifold French door

What is Lattice?

Lattice is made of skinny strips of wood most usually employed in a criss-cross construction for trellises to support climbing crops in gardens or to provide as porch skirting.

But it is ideal for simple wall molding tasks far too. (Sort of like Sharpie shiplap but way additional legit.)

The value of molding has skyrocketed currently (alongside with every other house improvement source), so we figured out a way to incorporate expensive seeking batten wall molding for the portion of the price using helpful dandy lattice strips at $1.28 for every linear foot.

If you’ve never ever mounted any form of molding ahead of, it’s the best novice variation to consider due to the fact it involves no miter cuts and lattice can sit flush proper on leading of your existing baseboards considering that they’re thinner than frequent 1×2 boards.

a stack of lattice strips

How to Make a Batten Wall Using Lattice Strips

You could increase this vertical batten wall all about the space, as wainscoting, or just as a board and batten accent wall. You could go away your partitions basic without any wall decor for a minimalist technique or layer it with artwork for even extra character.

It would be perfect for adding onto a basic kitchen area island as well. Maintain in head while, if you have a textured wall, the course of action will not be as uncomplicated, because you will need to have to increase these MDF panels to your textured partitions employing Liquid Nails and brad nails first.


Methods to Make a Batten Lattice Wall

measuring a wall to place lattice strips for a DIY batten wall

Stage 1 – Measure and Determine on a Layout

Measure your overall wall initial, determine how much apart you want your batten (vertical lattice strips) to be, and mark their placement on the wall with a pencil.

Recall that lattice strips are 1 1/2″ extensive, so issue that into your structure plan. We set our battens to have an 8 1/2″ gap in between.

Action 2 – Slice Lattice Length

Evaluate the top of your wall from baseboard to crown and cut the first lattice strip to the essential length with a jigsaw. (Not all walls will be flawlessly the similar peak all the way across, so do not cut all of your lattice based mostly on that initial measurement.)

checking with a level to make sure lattice strips are perpendicular

Phase 3 – Use a Degree to Test Lattice Placement

“Dry fit” the 1st lattice strip and use a stage to make guaranteed it is completely straight.

Step 4 – Nail Lattice

At the time you are content with the lattice strip placement, nail it to the wall with the brad nailer (or a hammer).

You can use design adhesive right here as properly, if you select, but simply because the lattice is so light-weight, it’s entirely optional. (The batten wall will also be less complicated to take out without adhesive afterwards if just one day you alter your thoughts.)

installing lattice strips for wall molding by dry fitting

Step 5 – Repeat

Repeat Methods 2-4 right up until you have positioned all lattice strips alongside the wall.

nailing lattice strips to a wall for DIY batten wall molding

Move 6 – Caulk Cracks and Wood Fill Nail Holes

Caulk all of the edges of the lattice strips to fill all of the cracks, and fill all of the nail holes with wood filler.

caulking and wood filling lattice strips

Move 7 – Sand Wood Filler

Once the wood filler is thoroughly dry, sand easy with good grit sandpaper (we use an orbital sander to make the method go quicker). Brush absent any sanding dust following.

batten wall after caulking, wood filling, and sanding smooth before painting

Step 8 – Paint

Give everything a fresh coat of paint and you are accomplished! (We painted the wall 1st with the same colour we planned to use on the lattice strips so that we would not have to do the job all-around all of the details afterwards.)

batten wall painted white with brass vintage style sconces and green banquette

The Completed Batten Wall

Really do not you assume these two batten partitions include so significantly to this little breakfast nook corner? I love it so significantly!

We added these classic design sconces to deliver far more light into this windowless area. What do you believe?!

They operate so nicely with this linear chandelier that provides a touch of present day, and the brass pops against that batten wall we painted Benjamin Moore Chantilly Lace.

breakfast nook with green banquette bench, white batten wall made of lattice strips, and brass lighting

Wrapping Up Breakfast Nook Details

I even now prepare to paint the air vent and include knobs to the banquette cabinet doorways.

(Now that it is dry, I have to confess, do not appreciate the paint I experienced to use on the banquette many thanks to provide chain problems causing my most loved cupboard paints to be marketed out. But oh well. If that is our greatest obstacle, I’ll just take it.)

I just obtained the get in touch with this 7 days that the recently reupholstered cushions are concluded! So it will all be coming alongside one another in in this article shortly.

These Diy herringbone LVP floors nonetheless glance completely remarkable since we put in them a couple of months in the past! Next on the record is creating a table, refinishing some secondhand eating chairs for the other side, and adding some vintage artwork and decor finds.

It will be so charming as we wrap up the ultimate facts.

olive green banquette bench in a breakfast nook with white batten, herringbone floors, and black door

Have you ever performed a Do it yourself batten wall ahead of? Or observed a new use for lattice strips? They are the most effective for so many points!

Much more Task Suggestions Using Lattice Strips

If you want more wall molding concepts, listed here are a number of extra far too.

Far more Do-it-yourself Wall Molding Ideas



Supply url